فارسی
Tissue embedding center DS 9903
- has a modular system
- has a 5 liter tank for melting paraffin
- has two small tanks with the capacity of 1.5 liter
- cold plate
- electrical heated forceps
This device has a modular structure with a 5 liter tank for melting paraffin and two small tanks with a capacity of 1.8 liters or 132 tissue cassettes. It is also possible to place 60 blocks on the cold plate
The modular structure of this device makes it possible to place the cold plate on the right or left side, in the desired direction
The electrical heated forceps connected to this device have facilitated and high safety in removing the tissue and finally the proper quality of molding.
Temperature range (adjustable at user request)
Paraffin tank: 40 to 75 ° C
Hot plate: 40 to 75 ° C
Cold plate: -15 to 0 ° C
Equipped with live time system and delay start setting as well as setting the device off at a specified time.
It is also possible to drop paraffin through the plate behind the valve or foot pedal.
Tissue embedding center is very compact and takes up little space on your desktop in the factory during operation
| weight | embedding module: 17.5 kg |
|---|---|
| dimensions( width, depth,height) | embedding module: 300,550,450 mm (excluding Forceps) |
| diameter and material of electrical forceps tip | stainless steel can be provided in two diameters of 1.2 or 2.2 mm |
| (temperature range (adjustable at user request | paraffin tank: 40 to 75 ° C |
| heating time | paraffin tank : 1.5 to 3 hours (from ready to start molding to |
| cold plate cooling time | 15 minutes starting at room temperature |
Be the first to review “Tissue embedding center DS 9903”
Related products
Embedding
Embedding
Embedding
Embedding
Embedding
Embedding
Embedding
Reviews
There are no reviews yet.